| Function Module |
Operation |
Description |
| Basic Operations |
Keyboard and mouse |
Can finish all operations |
| X-ray tube control |
Mouse click |
Using mouse to click the X button can turn on or off the X-ray |
| Status bar |
Visual indication |
Indicates the interlock status, pre-heat status, and X-ray status by flashing alternately red and green |
| Image effect adjustment |
Parameter adjustment |
The brightness, contrast and gain of the image can be adjusted freely to achieve a satisfactory result |
| Product list |
Parameter management |
Users can save the inspection parameters such as Z-axis position, brightness, contrast and gain, and can directly call the parameters |
| Navigation window |
Click navigation |
The table will move to the place you click and display on the screen |
| Motion axis status |
Real-time display |
Display real-time coordinates |
| Inspection result |
Measurement display |
The measurement results (voids rate, distance, area, etc., set by users) display in order |
| Speed control |
Speed adjustment |
The movement speed of each axis can be adjusted to slow, normal and fast |
| Voids rate measurement |
Automatic calculation |
Click on two points to determine a rectangle |
| Parameters adjustment |
Custom settings |
Users can adjust the grayscale threshold, pixel, contrast, size filtering and other parameters |
| Add voids manually |
Manual input |
Users can draw a polygon or a free figure and calculate it as a void into the void rate |
| Save parameters |
Parameter storage |
Users can save parameters such as grayscale threshold, pixel, contrast, size filtering and other parameters, and can directly call the parameters |
| Other measurement functions |
Distance measurement |
Click the A and B points to set as the baseline, then click the C point to measure the vertical distance from the C point to the baseline |
| Other measurement functions |
Distance rate |
Mostly used to measure the soldering rate of the through-hole |
| Other measurement functions |
Angle |
Click the A and B points to set as the baseline, then click the C point to measure the angle between the BA and BC rays |
| Other measurement functions |
Radius |
Click three points to determine a circle and measure the circumference, area and radius |
| Other measurement functions |
Perimeter |
Mostly used to measure square components, click two points to determine a square, measure the length, width and area |
| Automatic inspection |
Manual setting |
Users can set any positions on the table as inspection points, the software will automatically inspect and save the picture |
| Automatic inspection |
Array |
For regular inspection points, users only need to set two of the inspection points and the number of rows and columns, the software will automatically inspect each point and save pictures |
| Automatic inspection |
Automatic identification |
For inspection points with obvious features, the software automatically identifies the positions, takes measurements, and saves the image |
